Material Character
Handmade ceramic tile surfaces with visible variation in tone, glaze movement, relief, edge character, and slight dimensional difference. Variation belongs to the finished work.
Vlaamse Tegelmeesters
Trade Spec Sheet
Handmade ceramic surfaces from East Flanders, Belgium. Prepared batches, glaze finishing, and project commissions by direct inquiry.
Typical Uses
Interior wall surfaces, kitchens, bathrooms, shower areas, fireplace surrounds, hospitality accents, and project-specific architectural surfaces. Exterior use is reviewed individually.
Sample Policy
Samples may be supplied for active projects once the intended surface direction is known. They indicate glaze family and material behaviour; final batches remain naturally varied.
Lead Times
Prepared bisque stock may reduce timing where available. Larger commissions, relief surfaces, and custom glaze directions should be discussed at least 8 weeks ahead.
Annual Production
Approximately 600 m² of tiles are produced each year, keeping the work limited and tied to atelier rhythm.
Drying & Firing
Tiles are dried between pieces of wood, bisque fired at 1080°C, and glaze fired at 1180°C.
Finish Options
Flat glazed surfaces, selected relief surfaces, glaze-family selection, and restrained custom glaze directions. Strict factory repetition is not the intended character.
Installation Notes
Blend tiles across the batch before installation. Substrate, waterproofing, adhesive, grout, movement joints, and final suitability must be confirmed by the appointed installer.
Care Notes
Use mild non-abrasive cleaning. Avoid harsh acids, strong alkalis, abrasive pads, and snagging cloths on relief surfaces. Relief may require a soft-bristle brush.
Inquiry Requirements
Share intended setting, approximate surface area, surface family, project location, timing, and whether samples are required for client or material-board review.